DP820 Dynamic values Appendix B Dynamic Data
170 3BSE027630-600 B
pxlc# Pulse counter value, freeze
condition
0 = Latch inhibit on DI+. "Freeze"
PSXL-value on pos. edge of DI
signal.
1 = Latch inhibit on DI-. "Freeze"
PSXL-value on neg. edge of DI
signal.
2 = Latch inhibit on coincidence.
3 = Latch inhibit on sw freeze, bit
frzps x in the Dynamic values.
4 = Latch inhibit on coincidence on
the "other" channel.
r_lis Reset frequency value 1 = Reset of bit lisp #
0 = -
splc# Frequency value freeze condition
(Speed Latch Inhibit Condition)
0 = Latch inhibit on DI+.
1 = Latch inhibit on DI-.
2 = Latch inhibit on coin on "own"
channel.
3 = Latch inhibit on sw freeze, bit
frzsp x in the Dynamic values.
frzps# Freeze pulse counter value
channel #
0 = -
1 = freeze
frzsp# Freeze frequency value channel # 0 = -
1 = freeze
Abbreviation Name Values
To Next Page
Loading...
