CI801 Section 3 Run-time Operation
50 3BSE027630-600 B
• Redundant power B failure
Power fail on the optical modem
Station address warning
There
is a mismatch between the actual address on the CI801 and the one
configured in the system or if the address is set above 62. The warning will be
cleared when the system is restarted with the right configuration or if the switch on
the CI801 is changed back to the configured address.
Configuration
This control is not available if the unit is used towards AC 800M. The
configuration data is then set via Control Builder Professional.
For configuration of the module, select the “Configuration” menu item.
Figure 16. CI801 - Configuration for AC870P
To Next Page
Loading...
