Menu Description
Charger link connectivity
menu
To connect your EVSE to a network
Add or delete card menu To add or delete RFID cards
2.8.4 Errors
If the EVSE detects a problem, the error LED comes on. The
ChargerSync
app shows
the error description. For the possible causes and the possible solutions, refer to
section 6.2.
2.9 Description of the display screens (option)
2.9.1 Boot screen
During the start up of the EVSE, the display shows the Boot screen.
2.9.2 Standby/Idle screen
Total : 325.634,622 KWh 30.07.2020 10:30
SN : TACW2240120G4567 v 00.55.19
A B
C D E
A Total delivered energy
B Date
C Guide
D Serial number
E Firmware version (MID certified)
The display shows the Standby/Idle screen when the EVSE is in idle status. Then,
the EVSE is available for a charge session.
1
It can be necessary to update in multiple steps, until the app does not detect newer firmware.
The app updates one firmware version at a time.
Description
BCM.V3Y00.0-EN | 002 25
To Next Page
Loading...
