4 Operation
4.1 Prepare before use
1. Appoint a site operator and an installation engineer, if these are other persons
than you.
2. Make sure that the equipment is installed and commissioned according to the
instructions in the installation manual.
3. Make an emergency plan that instructs people what to do in case of an
emergency.
4. Make sure that the space around the equipment cannot get blocked. Think of
snow or other objects. Refer to the space requirements. Refer to section 7.6.3.
5. Make sure that maintenance is done on the equipment. Refer to section 5.
4.2 Energize the EVSE
1. Close the breaker that supplies the power to the EVSE.
Warning:
Hazardous voltage
• Be careful when you work with electricity.
• The power supply comes on.
• A series of self-checks start, to make sure that the EVSE works correctly and
safely.
• If the EVSE detects a problem, the error LED comes on. The
ChargerSync
app
shows the description of the error.
4.3 Connect the EVSE with the ChargerSync app
Preliminary requirements
• Mobile device with the
ChargerSync
app
Procedure
1. Find your pin code in the package with the RFID card.
• The pin code has 8 characters.
• The letters are case-sensitive.
2. Download the
ChargerSync
App from the
Google Play Store
or
App Store
.
3. Start the
ChargerSync
app.
4. Do the instructions that the
ChargerSync
app shows.
Operation
34 BCM.V3Y00.0-EN | 002
To Next Page
Loading...
