12
3
(Continued)
c. Apply blood to the test strip as shown in the picture.
d. The meter will beep once to let you know that you have
applied enough blood.
Notes:
• Once you start applying blood, you have 60 seconds to ll
the test strip on the same side of the test strip only. The
time you have left is shown as a countdown on the screen.
• The time that the meter takes to display a result depends
on your blood glucose level. The higher your blood
glucose level, the longer it takes to get a result.
• The meter turns o after 2 minutes of inactivity. Remove
and reinsert the unused test strip to restart the meter.
To Next Page
Loading...
