36
Install the FreeStyle Auto-Assist Software
Note: FreeStyle Auto-Assist is compatible with both PC and Mac operating systems.
Step Action
1
With your meter o, use the provided micro USB cable to connect your meter's USB port
to your computer. If you do not have the micro USB cable provided with the meter, you
may use other micro USB cables.
2
The software will start automatically for installation or use.
Follow the InstallShield Wizard prompts. Click Next after each entry.
Note that you may be asked to supply an administrator password.
3
Click Finish or Close once installation is complete.
The program will automatically launch whenever you connect the meter to your
computer.
WARNING:
To avoid the possibility of electric shock, never perform a blood
glucose test while the meter is connected to the computer.
To Next Page
Loading...
