5
3
saveback
Today’s date
April, 2012
25
Tap the arrow buttons to change the date. Then tap save.
4
saveback
Current time
pm
12 43
:
Tap the arrow buttons to set the time. Then tap save.
Notes:
• You will see the Home screen when you complete this step.
12:43pm
Logbook
Set up is complete!
You can now insert a
test strip.
• If you don't complete these steps, the meter will continue to
prompt you to set the language when you turn it on.
IMPORTANT: If the date and time are not set correctly, some
meter functions may not work properly. If the meter loses
time, the home screen will display --:-- until it is reset.
To Next Page
Loading...
