7
• Double-clicking an image displays the selected camera image in full screen or
switches back to the original view.
• Click the right-hand button to show or hide the menu in order to display only
the relevant camera layout in full screen.
The live view is divided into the following function areas:
For selecting the configuration and operating menus
For selecting and searching for cameras and/or displaying of
various analysis functions
For selecting camera commands and actions for the selected
camera
For controlling the view on the local monitor
In live image, the current recording status will always be shown
(top right) in the form of a coloured R (“Record”). Every video
channel can have one of the following three statuses:
No recording programmed, no HDD available,
no event
Event alarm
(for motion, alarm input or VCA)
To Next Page
Loading...
