Abus TVVR45021 - Configuration; Overview; General Settings

Configuration
24
Configuration
Note
The Configuration menu is used to manage all de-
vice settings.
Warning
Ensure that the date and time are set correctly.
ATTENTION:
Subsequent alterations may lead to loss of data.
Ensure data is backed up promptly.
Overview
Menu
Setting
General
Language, video, time, date,
mouse, password, daylight saving
time and other settings.
Network
Required network settings (manual
IP, DHCP, PPPOE, DDNS etc.) and
overview of network status.
RS-232
Settings for the serial interface (for
servicing purposes only).
Alarm
Settings for the alarm I/Os for the IP
cameras.
Live view
Display settings and assignment of
the event output.
Exception
Response of the device in excep-
tional cases (hard disk drive full,
network disconnected etc.)
User
Adding and changing users and as-
signing access rights.
Hot Spare
Setting up the back-up function in
the event of device failure.
General settings
General tab
Setting
Language
On-screen display language.
Output Standard
Video output format at BNC video
output (PAL/NTSC).
Resolution
Monitor resolution
Time Zone
GMT (Greenwich Mean Time).
Date Format
MM-DD-YYYY, DD-MM-YYYY,
YYYY-MM-DD.
Date
Set date
Time
Set time
Mouse Pointer
Speed
Slider (left = low speed,
right = high speed)
Enable Wizard
Box ticked:
The wizard will appear when the
system is started up.
Enable Password
Box not ticked:
A password does not need to be
entered into the recorder itself.
However, the password does need
to be entered if accessing via the
network.
Box ticked:
The password needs to be en-
tered in order to use the menu.