Maintenance
57
Maintenance
Select the "Maintenance" item in the overview menu to
carry out system maintenance if problems arise.
System Info
Note
The information menu shows the technical data
for the device and information on the various set-
tings of the cameras, recording, alarm, network
and HDD.
This can be useful for support queries, for exam-
ple.
Log Information
Note
You can search for "events" according to the fol-
lowing main types/events/parameters:
All
Alarm
Warning
Operation
Information
Motion detection
Start/stop
Start/Stop Video Tampering
Detection
Video Signal Loss
Illegal Login
HDD Full
This menu is used for device maintenance and
should only be used by experienced users.
Device information (Serial No., Firm-
ware Status etc.)
In Log Information (=log file), you can
search for recordings or information
(S.M.A.R.T. hard disk drive status) by
certain criteria, such as alarm, excep-
tion, operation or information.
Import and export settings
Performs a firmware upgrade
Displays the transmission and recep-
tion rate of the recorder
Checks the hard disk drive for errors