AC Tech MC1000 series - 14.2 Start;Stop & Speed Control; 14.2.2 Two-Wire Start;Stop Control

31
SPEED REFERENCE SOURCE TABLE
DISPLAY
DISPLAYDISPLAY
DISPLAY DESCRIPTION
DESCRIPTIONDESCRIPTION
DESCRIPTION
KEY KEYPAD - Change speed using the UP and DOWN arrow keys.
VDC 0 - 10 VDC analog input at TB-5A.
IDC 4 - 20 mA analog input at TB-5B.
SP#1 PRESET SPEED #1
SP#2 PRESET SPEED #2
SP#3 PRESET SPEED #3
SP#4 PRESET SPEED #4
JOG JOG SPEED - In JOG mode, JOG SPEED = PRESET SPEED #2.
MOP MOTOR OPERATED POT - Change speed using contact closures
at TB-13A (DEC FREQ) and TB-13B (INC FREQ).
The table below shows the possible SPEED REFERENCE SOURCE indications
for the auxiliary mode display: