48
PARAM.
PARAM.PARAM.
PARAM. PARAMETER
PARAMETERPARAMETER
PARAMETER RANGE OF
RANGE OFRANGE OF
RANGE OF FACTORY
FACTORYFACTORY
FACTORY
NUMBER
NUMBERNUMBER
NUMBER NAME
NAMENAME
NAME ADJUSTMENT
ADJUSTMENTADJUSTMENT
ADJUSTMENT DEFAULT
DEFAULTDEFAULT
DEFAULT
47 TB13A NONE, 0-10VDC, 4-20MA, NONE
SPEED#1, LOC SEL,
DEC FREQ
48 TB13B NONE, 0-10VDC, 4-20MA, NONE
SPEED#2, INC FREQ,
JOG FWD, JOG REV
49 TB13C NONE, 0-10VDC, 4-20MA, NONE
SPEED#3, LOC SEL,
RUN REV, STRT REV
50 TB13D EXT FAULT, EXT /FAULT, EXT FAULT
EXT CLEAR
52 TB14 OUT NONE, RUN, FAULT, NONE
53 TB15 OUT /FAULT, LOCK, @ SPEED,
54 RELAY ABOVE#3, I LIMIT, AUT/MAN
57 SERIAL DISABLE, W/TIMER, W/O TIMR DISABLE
58 ADDRESS 1 - 247 30
61 PASSWORD 0000 - 9999 0019
63 SOFTWARE (VIEW - ONLY) (N/A)
64 MONITOR OFF, ON ON
65 PROGRAM MAINTAIN, RESET 60, RESET 60
RESET 50 (NOTE 4)
66 HISTORY MAINTAIN, CLEAR MAINTAIN
69 LANGUAGE (NOTE 1) ENGLISH
70 FAULT HISTORY (VIEW - ONLY) (N/A)
NOTE 1: REFER TO SECTION 18.0 - DESCRIPTION OF PARAMETERS.
NOTE 4: "RST HIGH" WILL APPEAR ON UNITS SET UP FOR HIGH FREQUENCY.
PARAMETER MENU CONT’D
To Next Page
Loading...
Need help?
General
