System Utilities 2-19
If user is unable to obtain correct password then it must be removed. There are two
methods to do this.
Method 1: 0
If BIOS menu item Power on Password is set to Enabled, then Crisis Recovery disc
must be used.
Method 2: 0
If BIOS menu item Power on Password is set to Disabled.
1. Boot to DOS and execute unlockPw.exe. (Figure 2-19)
Figure 2-19. Clear Supervisor Password Utility
2. When message Clear the SU Pws completely is displayed, supervisor password
has been removed.
To Next Page
Loading...
