Acer Aspire 8951G - Lower Cover DIMM Module Removal; Lower Cover DIMM Module Installation

3-12 Machine Maintenance Procedures
Lower Cover DIMM Module Removal 0
Prerequisite:
Battery Cable Removal
1. Locate DIMM (Dual In-Line Memory Module) module (B) on lower cover. (Figure 3-7)
2. Open module clips (A) to unlock module. (Figure 3-8)
Figure 3-8. DIMM Module(s) in Lower Cover
3. Disconnect DIMM module (B) from mainboard connector (D).
4. Repeat steps 2 and 3 for remaining DIMM module (C).
Lower Cover DIMM Module Installation 0
1. Connect DIMM module (C) to mainboard connector (D). (Figure 3-8)
2. Push down on module until clips (A) lock in place.
3. Repeat steps 2 and 3 for DIMM module (B).
4. Install logic door.
A
A
B
C
D