Acer Aspire 8951G - USB Board Removal

Machine Maintenance Procedures 3-43
USB Board Removal 0
Prerequisite:
Upper Cover Removal
1. Locate USB board (B) on lower cover. (Figure 3-45)
2. Disconnect USB FFC (A) from USB board connector (C). (Figure 3-47)
Figure 3-47. USB Board
3. Remove screw (D) from lower cover.
4. Lift USB board tab (E) until clear of guidepin (F). (Figure 3-48)
Figure 3-48. Removing USB Board
5. Remove USB board from USB port slots on lower cover.
A
D
C
B
F
E
G