Machine Maintenance Procedures 3-55
LCD (Liquid Crystal Display) Module Removal 0
Prerequisite:
Upper Cover Removal
1. Locate LCD module on upper cover. (Figure 3-59)
2. Remove screws (A) from LCD hinges on lower cover.
Figure 3-59. LCD Module
3. Lift and remove LCD module from lower cover guidepins (B).
LCD Module Installation 0
1. Install and align LCD hinges to lower cover guidepins (B). (Figure 3-59)
2. Install and secure screws (A) to lower cover.
3. Install upper cover.
ID Size Quantity Screw Type
A M2.5x6.5 2
To Next Page
Loading...
