Machine Maintenance Procedures 3-31
4. Disconnect DIMM module (D) from mainboard connector (E).
5. Repeat steps 2 and 3 for remaining DIMM module.
Upper Cover DIMM Module Installation 0
1. Connect DIMM module (D) to mainboard connector (E). (Figure 3-32)
2. Press on module until clips (C) lock into place.
3. Repeat steps 2 and 3 for remaining DIMM module.
4. Locate slots on upper cover (F). (Figure 3-33)
Figure 3-33. Upper Cover DIMM Module Door Slots
5. Install DIMM module bracket flanges (G) to slots on upper cover.
6. Install and secure screw (A) to upper cover.
7. Install keyboard assembly.
ID Size Quantity Screw Type
A M2.5x4.0 1
To Next Page
Loading...
