Machine Maintenance Procedures 3-29
3. Remove screw (F) from upper cover.
4. Remove function board (A) from guidepins (G) on upper cover.
Function Board Installation 0
1. Align function board (A) with guidepins (G). (Figure 3-30)
2. Install function board on upper cover.
3. Install and secure screw (F) to upper cover.
4. Connect and lock function board FFC (D) to function board connector (E).
5. Install keyboard assembly.
ID Size Quantity Screw Type
F M2.5x6.5 1
To Next Page
Loading...
