Acer Aspire 8951G - Upper Cover Installation

Machine Maintenance Procedures 3-37
Upper Cover Installation 0
1. Install side (T) of upper cover until secure to latch (V) on lower cover. (Figure 3-42)
Figure 3-42. Installing Upper Cover Latch
2. Install upper cover so touchpad connector (U) is inserted through opening in upper cover.
(Figure 3-40)
3. Install upper cover to lower cover.
4. Install and secure screws (R) to lower cover. (Figure 3-39)
5. Connect fingerprint scanner FFC (P) to mainboard connector (Q). (Figure 3-38)
6. Connect LAN board FFC (M) to mainboard connector (N).
7. Connect function board FFC (K) to mainboard connector (L).
8. Secure WLAN main and auxiliary cables (G) to guides (J). (Figure 3-37)
9. Route WLAN main and auxiliary cables (G) through upper cover opening (H).
(Figure 3-36)
10. Turn computer to show top of upper cover.
11. Secure microphone cable (C) to guide (E). (Figure 3-35)
12. Secure LVDS cable (A) to guide (F).
13. Connect microphone cable (C) to mainboard connector (D).
14. Connect LVDS cable (A) to mainboard connector (B).
15. Install LAN board.
16. Install upper cover DIMM module.
17. Install function board.
V
T