Acer Aspire 8951G - Using the LAN MAC EEPROM Utility

2-28 System Utilities
Using the LAN MAC EEPROM Utility 0
Use MAC.BAT utility to write the MAC.CFG file to EEPROM under DOS mode.
1. Use a text editor (e.g. Notepad) to open and edit the MAC.CFG file. (Figure 2-35)
Figure 2-35. MAC.CFG File
2. In DOS mode, run MAC.BAT to write MAC values to eeprom. (Figure 2-36)
Figure 2-36. MAC.BAT
3. Reboot computer when process has completed.
Field Name Value Description
Title MAC Address byte N/A
WriteData 001122334455 MAC value
StartAddr 7A MAC address
WriteLeng 6 MAC value length
KeepByte 0 N/A
MAC.CFG - Notepad
MAC.CFG - Notepad
Title= MAC Address byte
WriteData=’001122334455’
StartAddr=7A
WriteLeng=6
KeepByte=0
File Edit Format View Help
C:\MAC>mac.bat
C:\MAC>eeprom w MAC.cfg
Progress --> \
Write Data to EEPROM OK!!