2-24 System Utilities
Using DMI Tools 0
The DMI (Desktop Management Interface) Tool copies BIOS information to EEPROM. Used in
the DMI pool for hardware management.
When the BIOS shows Verifying DMI pool data, it is checking that the table correlates
with the hardware before sending it to the operating system (Windows, etc.).
To update the DMI Pool, perform the following:
1. Boot to DOS.
2. At the prompt, enter qdmi301.exe.
To execute a specific function, select the associated menu
number. (Figure 2-28)
Figure 2-28. DMI Tools Main Menu Screen
To Next Page
Loading...
