Acer Aspire 8951G - ODD Module Installation

3-20 Machine Maintenance Procedures
11. Remove screws (J) from ODD bracket (K). (Figure 3-20)
Figure 3-20. ODD Bracket
12. Remove ODD bracket.
ODD Module Installation 0
1. Install ODD bracket (K) to ODD module. (Figure 3-20)
2. Install and secure screws (J) from ODD bracket to ODD module.
3. Install ODD bezel (H) to ODD tray (F). (Figure 3-18)
4. Install and secure latch (G) to tray.
5. Install ODD tray (F) into ODD module.
6. Install ODD module into slot. (Figure 3-16)
7. Connect ODD cable (A) to ODD module connector. (Figure 3-15)
8. Connect ODD cable to mainboard connector (B).
ID Size Quantity Screw Type
C M2.5x4.0 1
J M2.0x3.0 2
J
K