Acer Aspire 8951G - ODD (Optical Disk Drive) Module Removal

3-18 Machine Maintenance Procedures
ODD (Optical Disk Drive) Module Removal 0
Prerequisite:
Main HDD (Hard Disk Drive) Module Removal
(Must remove Secondary HDD. Procedure is shown in Main HDD removal)
1. Locate ODD cable (A) on mainboard. (Figure 3-15)
2. Disconnect ODD cable from mainboard connector (B).
Figure 3-15. ODD Cable
3. Remove screw (C) from lower cover.
4. Push ODD module bracket (D) from ODD slot. (Figure 3-16)
Figure 3-16. Pushing ODD Module through Slot
5. Remove ODD module (E).
6. Disconnect ODD cable from ODD module connector.
A
B
C
D
E