Machine Maintenance Procedures 3-59
DC-IN Cable Removal 0
Prerequisite:
Speaker Module Removal
1. Locate DC-IN cable (A) on lower cover. (Figure 3-63)
Figure 3-63. DC-IN cable
2. Remove DC-IN cable from guides on lower cover.
3. Remove DC-IN cable connector (B) from lower cover.
DC-IN Cable Installation 0
1. Install DC-IN cable connector (B) to lower cover. (Figure 3-63)
2. Install DC-IN cable (A) to guides on lower cover.
3. Install speaker module.
To Next Page
Loading...
