3-40 Machine Maintenance Procedures
5. Remove fingerprint scanner from upper cover.
Fingerprint Scanner Installation 0
1. Align and install fingerprint scanner module (A) to guidepin (G) on upper cover.
(Figure 3-43)
2. Install fingerprint scanner bracket (E) to latch (F) and guidepin (G) on upper cover.
(Figure 3-44)
3. Install and secure screw (D) to upper cover. (Figure 3-43)
4. Connect and lock fingerprint scanner FFC (B) to fingerprint scanner connector (C).
5. Install upper cover.
ID Size Quantity Screw Type
D M2.0x2.0 1
To Next Page
Loading...
