Acer Aspire 8951G - WLAN Module Removal; WLAN Module Installation

Machine Maintenance Procedures 3-15
WLAN Module Removal 0
Prerequisite:
Battery Cable Removal
1. Locate WLAN (Wireless Local Area Network) module (E) on mainboard. (Figure 3-7)
2. Disconnect WLAN main (A) and auxiliary (B) antenna cables from WLAN module
connectors (F). (Figure 3-11)
Figure 3-11. WLAN Module
3. Remove screw (C) from mainboard.
4. Disconnect WLAN module (E) from mainboard connector (D).
WLAN Module Installation 0
1. Connect WLAN module (E) to mainboard connector (D). (Figure 3-11)
2. Install and secure screw (C) to mainboard.
3. Connect main (A) and auxiliary (B) antenna cables on WLAN module connectors (D).
4. Install logic door.
ID Size Quantity Screw Type
C M2.5x4.0 1
A
B
C
E
D
F