Acer Aspire 8951G - DT Module Removal; DT Module Installation

Machine Maintenance Procedures 3-45
DT Module Removal 0
Prerequisite:
Upper Cover Removal
1. Locate DT module (C) on lower cover. (Figure 3-45)
2. Disconnect DT cable (A) from DT module connector (B). (Figure 3-49)
Figure 3-49. DT Module
3. Remove screw (D) from lower cover.
4. Remove DT module (C).
DT Module Installation 0
1. Align DT module (C) to guidepin (E). (Figure 3-49)
2. Install DT module on lower cover.
3. Install and secure screw (D) to lower cover.
4. Connect DT cable (A) to DT module connector (B).
5. Install upper cover.
ID Size Quantity Screw Type
D M2.5x4.0 1
DEB
A
C