Machine Maintenance Procedures 3-25
6. Install keyboard assembly flush against the upper cover. (Figure 3-22)
7. Press along edge of keyboard assembly until secure with upper cover.
8. Turn computer over to show bottom of lower cover.
9. Install and secure screws (C) in ODD bay to lower cover. (Figure 3-21)
10. Install and secure screws (A) and (B) to lower cover.
11. Install touchpad.
12. Install ODD module
13. Install main HDD module.
14. Install lower cover DIMM module.
ID Size Quantity Screw Type
A M2.5x6.5 22
B M2.0x3.0 2
C M2.0x2.0 (Wide) 3
To Next Page
Loading...
