How to troubleshoot line bar or line defect on Acer H6500 Projector?
To troubleshoot line bars or defects on your Acer Projector, check if the Main Board and the DMD Board are assembled properly. Also, check the Main Board, DMD Board, and DMD Chip.
Why does my Acer Projector have poor uniformity or shadows?
If your Acer Projector displays poor uniformity or shadows, make sure the projection screen is free of dirt and the projection lens is clean. Ensure the Brightness is within specification. Also, check the rod alignment and Engine module.
What to do if Acer H6500 function is abnormal?
If your Acer Projector's function is abnormal, perform a "Reset" of the OSD Menu (All data). If the issue continues, check the Main Board.
How to fix dead pixel or dust on Acer Projector?
To address dead pixels or dust issues on your Acer Projector: * Ensure the projection screen is free of dirt. * Ensure the projection lens is clean. * Clean the DMD Chip and Engine Module. You may also need to check the DMD Chip and Engine Module.
How to recover forgotten administrator password on Acer Projector?
To recover a forgotten administrator password on your Acer Projector: locate the unique Universal Password printed on the Security Card, which acts as a back door. Alternatively, click the "AcerSNID", input the SNID number from the Security Card, and click "Calculate" to reveal the Universal Password.
General| Number of colors | 1.073 billion colors |
|---|---|
| Projection distance | 1.5 - 10 m |
| Horizontal scan range | 0 - 100 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 0 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, vertical | -15 - 15 ° |
| Projector brightness (economic mode) | 1600 ANSI lumens |
| Aspect ratio | 4:3, 16:9 |
| RS-232 ports | - |
| Connectivity technology | Wired |
| Digital zoom | 8 x |
| Optical zoom | 1.2 x |
| Focal length range | - mm |
| Aperture range (F-F) | 2.55 - 2.85 |
| Lamp type | OSRAM |
| Lamp power | 240 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 5000 h |
| Service life of light source (economic mode) | 3500 h |
| 3D | No |
| Full HD | Yes |
| Supported video modes | 1080p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | - dB |
| Placement | Ceiling |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Home cinema |
| Power source | AC |
| AC input voltage | 110 - 220 V |
| Power consumption (standby) | - W |
Weight and Dimensions| Weight | 2540 g |
|---|
Illustrates how to connect various devices like DVD players and PCs to the projector.
Step-by-step instructions for removing the lamp module from the projector.
Instructions for safely removing the projector's top cover module.
Guide for disassembling the keypad board and zoom ring components.
Detailed steps for removing the main board module and its associated shielding.
Instructions for removing the front cover module and IR sensor board.
Steps for removing the color wheel module and associated sensors.
Guide for removing the engine module, including spacers and focus ring.
Steps for removing the system fan and blower modules.
Instructions for removing the LVPS module, including connectors and brackets.
Guide for disassembling the lamp driver module and interrupt switch.
Steps for removing the bottom shielding and IO cover module.
Instructions for removing the elevator foot rubber from the projector base.
Instructions for accessing service mode to re-write system and lamp usage hours.
Guide for reassembling the lamp driver module and interrupt switch.
Instructions for reassembling the LVPS module and associated components.
Steps for reassembling the system fan and blower modules.
Guide for reassembling the DMD chip and its board.
Instructions for reassembling the engine module and its parts.
Guide for reassembling the front cover module and IR sensor board.
Detailed steps for reassembling the main board module and its connections.
Instructions for reassembling the keypad board and zoom ring components.
Steps for reassembling the projector's top cover module.
Instructions for reassembling the lamp module and its cover.
Instructions for disassembling the DMD chip and its board.
Steps for reassembling the color wheel module and associated sensors.
Explains LED status indicators for various messages and error conditions.
Provides a troubleshooting guide for common issues like no power or auto shutdown.
Troubleshooting steps for scenarios where the projector displays no image.
Troubleshooting steps for abnormal color reproduction or color temperature issues.
Troubleshooting steps for universal password failures and SNID confirmation.
Procedure to recover the administrator password using the SNID.
Steps to diagnose and resolve firmware upgrade failures.
Troubleshooting steps for image defects such as line bars or defects.
Troubleshooting for dead pixels or dust affecting image quality.
Steps to resolve issues causing the projected image to flicker.
Steps to resolve issues causing distorted or garbage images on the screen.
Troubleshooting for failures in the remote control or the projector's control panel.
Detailed steps for performing the firmware upgrade process.
Procedure for keying in EDID data for VGA and HDMI 1 connections.
Procedure for keying in EDID data for HDMI 2 connection.
Procedure to unlock SNID and reset default language settings.
To Next Page
