Acer X110 - 2-25 Assemble Lamp Driver Module

X1161/X1261/X1161A/X1161N/X110/H5360 Condential 2-18
2-25 Assemble Lamp Driver
Module
1. Screw 4 screw (as yellow circle) to
assemble the Lamp Driver Module
and Lamp Driver Holder.
2. Plug 3 connectors (as green square) to
assemble the cables on Lamp Driver
Module.
3. Screw 2 screws (as blue circle).
4. Screw 1 screw (as red circle) to
assemble the Lamp Driver Module.