Acom 2020S - Remote Control Via RS-232 Interface; Figure 6-2 | Web-Interface Running in Web Browser on a Smart Phone

User's Manual | ACOM 2020S | 1.8-54 MHz Linear Power Amplifier
June 2022
Sec t i o n REMOTE CONTROL | Page 55 of 76
Figure 6-2 | Web-interface running in web browser on a smart phone
Figure 6-2 | Web-interface running in web browser on a smart phone
6.2. Remote Control via RS-232 interface
The ACOM 2020S may be controlled remotely by the RS-232 port.
For cable connection, please see Section 2.5.c) Amplifier's RS-232 interface connector and Table 2-4 | Signals
and pin out of the amplifier's RS-232 connector.
For ACOM 2020S RS-232 interface protocol, please, contact your dealer (see Section
1.3 Owner Assistance).