60
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
RADIO FREQUENCY ENERGY
All interface cables used with this equipment must be shielded to maintain compliance
with radio frequency energy emission regulations and ensure a suitably high level of
immunity to electromagnetic disturbances.
European EMC directive 2014/30/EU
This equipment has been tested and found to comply with the limits for a class A
computing device in accordance with the specications in the European standard
EN55032. In a residential environment, this equipment may cause radio interference.
FCC Compliance Statement (United States)
This equipment generates, uses and can radiate radio frequency energy and if not
installed and used properly, that is, in strict accordance with the manufacturer’s
instructions, may cause interference to radio communication. It has been tested and
found to comply with the limits for a class A computing device in accordance with the
specications part 15 of FCC rules, which are designed to provide reasonable protection
against such interference when the equipment is operated in a commercial environment.
Operation of this equipment in a residential area may cause interference, in which
case the user at his own expense will be required to take whatever measures may be
necessary to correct the interference. Changes or modications not expressly approved
by the manufacturer could void the user’s authority to operate the equipment.
Canadian Department of Communications RFI statement
This equipment does not exceed the class A limits for radio noise emissions from digital
apparatus set out in the radio interference regulations of the Canadian Department of
Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le règlement sur le
brouillage radioélectriques publié par le ministère des Communications du Canada.
To Next Page
Loading...
Need help?
General
