Adobe ACROBAT 3D - Moving form fields manually

Moving form fields manually
You can manually position one or more form fields in a PDF file by dragging, by using
keyboard keys, or with the Cut and Paste commands.
To move one or more form fields:
1. Select the form fields.
2. Do one of the following:
● Approximately position the form field by moving the pointer inside the selected form
field, and drag the field to the new location. To constrain movement to a horizontal or
vertical direction, begin dragging, and then press Shift while continuing to drag the
selection.
● Precisely position the form field using the arrow keys to nudge the selected form field into
position.
● Exactly relocate the form field to the center of the current page by choosing Edit > Cut,
navigate to the desired location, and then choose Edit > Paste.
Note: Fields are placed in the center of the page only the first time they are pasted.
Additional pasted fields are staggered below and to the right of the previously pasted field.