Adobe ACROBAT 3D - Changing 3 D Capture preferences

Changing 3D Capture preferences
After you capture a 3D model, the default settings for the captured application appear in
the 3D Capture section of the Preferences dialog box. You can then edit these settings for
future captures of this file type.
To change 3D preferences:
1. Choose Edit > Preferences, and then click 3D Capture.
2. Make sure that Enable Global 3D Capture is selected to allow capture of 3D models from
other applications.
3. Select the 3D capture settings for the 3D CAD application you want to edit, and then click
Edit Settings.
4. Specify settings for the selected file type, and then click OK. (See 3D capture settings.)