Adobe ACROBAT 3D - Changing the tag for a highlighted region

Changing the tag for a highlighted region
If Acrobat tags a page element incorrectly, you can change the tag type for the highlighted
region.
Note: Save your work frequently, as the TouchUp Reader Order tool includes no Undo
command. To restore the PDF document to the last saved state, choose File > Revert.
To change the tag type for a highlighted region:
1. Select the TouchUp Reading Order tool on the Advanced Editing toolbar.
2. Make sure that Show Page Content Order is selected in the TouchUp Reading Order
dialog box.
3. To select a highlighted region, do one of the following:
● Drag to select it.
● Click the number of a highlighted region.
4. Click the tag button that you want to change the highlighted region to. (See TouchUp
Reading Order options.)