Advanced Instruments Osmo1 - Chapter 3: Osmo1 Interface Navigation; 3.3 Home Screen Overview; 3.4 Main Menu Functions

Chapter 1 Installation and setup
20
Osmo1® Single-Sample Micro-Osmometer User Guide
6. If desired, configure the Osmo1 to communicate with
your laboratory information system (LIS).
NOTE: For instructions, see “Setting up LIS
communication” on page43.
7. If desired, configure the Osmo1 to connect to your
local area network (LAN).
NOTE: For instructions, see “Configuring a LAN
connection” on page45.
8. If desired, set up control limits.
NOTE: For instructions, see “Establishing controls” on
page41.
9. When you have finished configuring the instrument,
tap the Home button on the Settings menu to return
to the Home screen.
Setup for the Osmo1 is now complete. If you want to
begin testing with the Osmo1 right away, you can skip to
Chapter 3, “Instrument operation” on page24.