Advanced Motion Controls 12A8 - Page 45

MNALAZIN-02 37
Operation / Getting Started
canbeattachedtothemountingcardorPCBinterface.Allsixwillhavetobetestedinorder
tofindtherightcommutation.
Before removing the motor wires, turn of
f both the main DC power supply
and the Function Generator. Never remove or make any connections to
the drive while power is applied!
Thepropercombinationofmotorwir
eswillyieldsmoothmotionandidenticalspeedsin
bothdirections.Impropercombinationswillcausejerkymotion,slowmovementinone
direction,and/oraudiblenoise.Oncethepropercombinationhasbeenfound,varyingthe
dutycycleshouldcausethemotorshafttorotateappropriatelyinresponsetotheinput.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com