Advantech PPC-3150 - Figure 2.17

19 PPC-3150/3170 User Manual
Chapter 2 System Installation & Setup
2. When installing MiniSATA long card, insert Mini SATA card into the correct main-
board slot, and fix it with two M2.5x4 screws in the accessory box. Then take out
the thermal pad from the accessory box and attach it onto MiniSATA card. (See
Figure 2.15)
Figure 2.15
3. When installing MiniSATA short card, first fix it with a copper cylinder screw from
the accessory box. (See Figure 2.16) Then insert the short card into the correct
mainboard slot, finally fix it with a screw and attach the thermal pad onto the
card, which can both be found in the accessory box. (See Figure 2.17 and Fig-
ure 2.18)
Figure 2.16