Advantech PPC-3150 - Figure 2.37

PPC-3150/3170 User Manual 30
3. Remove a screw on the side of I/O ironware. (See Figure 2.36)
Figure 2.36
4. Take CFast module out of module box and remove the two screws on its side.
Fix the iron tray to the top of CFast card, and insert it in the direction as
indicated in the below figure. Then tighten the two screws and connect
the red SATA cables. (See Figure 2.37)
The assembled CFast module is shown as Figure 2.38.
Note! Please keep the ironware properly for future use when the module is not
installed.
Note! When installing CFast card, the iron try should be installed on the top.