1 Safety Instructions
IST Series UPS (10kVA-200kVA)
User Manual
4
1.1.2 Use Announcements for Battery
Please use specified battery. Non-specified battery will damage the UPS.
The charging voltage of different brand and different model battery is different. Before using,
ensure that the charging voltage of the UPS matches that of battery. If doubted, please consult
the manufacturer for support.
Battery operation must be done according to instructions!
Battery operation must be done according to instructions, especially battery wiring. Irregular
operation will cause battery damage, even human injury.
It is prohibited to short circuit the anode and cathode of the battery. The battery wiring
must be tightened. It is strictly prohibited to touch any two wiring terminals of battery or
the bare terminals of wires simultaneously, or it may cause battery damage or human
injury.
Prevent electrolyte leaking from batteries. The metal objects and circuit board will be
corroded by the overflowing electrolyte and it will result in equipment damage and circuit
board short circuit.
Keep the battery away from fire source and all device that easy cause spark to avoid
danger or unnecessary lose.
1.1.3 Anti-Static Protection
The static generated by human bodies may damage the electrostatic-sensitive components
on PCB. Before touching the sensitive component, please wear anti-static rings and well
connect the other end of the anti-static rings to ground.
To Next Page
Loading...
