1 Safety Instructions
IST Series UPS (10kVA-200kVA)
User Manual
6
Ensure that connection of the measure meter is proper and normative, which is to avoid
the danger of electric arc, etc.
1.2 Operation and Maintenance Requirements
There exists high temperature and high voltage inside the UPS. Please comply with the
relevant safety regulations and operation procedures during installation, operation and
maintenance to avoid human injury or device damage. The safety precautions mentioned in
the user manual is just as a supplement to the local safety regulations. Our company does
not undertake the responsibility caused by violating the common safety operation
requirements or safety standards for design, manufacture and use the device.
The related operation and wiring for the UPS should be performed by qualified professionals,
and ensure the electric installation accord with the electricity installation standards.
The installation and maintenance man should be trained and know each safety
announcements and get the right operation method, and then, the installation, operation and
maintenance can be done.
Mounting and dismantling power cables is prohibited when power on. Please switch off the
power switches before mounting or dismantling power cables. Before connecting, make sure
the cable connection, cable labels are in accordance with the actual installation.
Touching high voltage directly or through damp objects will lead to lethal risk.
Only authorized professionals are allowed to open the UPS chassis! The input and
output of UPS are dangerous high voltage. Touching high voltage will lead to lethal risk.
To Next Page
Loading...
