3 Installation
IST Series UPS (10kVA-200kVA)
User Manual
30
During transporting, please take care and avoid impact or falling off.
If the UPS needs to be stored for a long time after unpacking, it is suggested to package the
UPS with original plastic bag.
The UPS can be transported by motor-driven forklift (as shown in Figure3-3) or manual forklift
(as shown in Figure3-4). While lifting, please keep the UPS center of gravity at that of the
forklift and move slowly and stably.
Figure3-3 Motor-driven forklift
Figure3-4 Manual forklift
When lifting, pay attention to the balance and stable of the UPS.
During moving, keep the UPS vertical and do not put down or uplift suddenly.
3.3.2 Unpacking
IST7 series UPS (10kVA-140kVA)
Step 1 Check if the package appearance is in good condition and if there is any damage caused by
transportation. If damaged, please inform the carrier immediately.
Step 2 Transport the UPS to assigned site.
To Next Page
Loading...
