4 Touch Screen
IST Series UPS (10kVA-200kVA)
User Manual
68
Generator setting
Figure4-47 Function configuration page
Dedusting setting
When the module works too long and the inner temperature rise is too large, you can perform
the force dedusting operation. Click dedusting setting, enable the regular self-dedusting
setting to start force dedusting. Once the output exceed 60% of rated output, it will not do the
force dedusting operation.
Figure4-48 Dedusting setting page
4.6.5 HMI Setting
In setting management page, click HMI setting icon , it will enter HMI setting page, as
shown in Figure4-49.
To Next Page
Loading...
