AEMC DTR 8510 - Configure Instrument

14 Digital Transformer Ratiometer DTR
®
Model 8510
• Main Screen: DisplaystheTestType,TestMode,Filter[Fast(F),
Normal(N)orSlow(S)],StorageMode[Auto(A)orManual(M)]and
thePresentNameplatevalues(ifenabled).
• CongureInstrument:Congurestheinstrument(see§4.3).
• Recall Data: Storeddatacanbeselectedanddisplayed(see§4.4).
NOTE: The program flow is two or three levels deep at various points.
The available choices for a level can be viewed by pressing the ▼or
▲ keys.
TheENTERkeyisusedtoselectthefollowingfunctions:
• Entercongurationmenu.
• EnterRecallDatamenu.
• Initiatestorageoftestresults,acceptlocationparametersandstore
theMeasurementRecord.
4.3 Configure Instrument
With the display showing Congure Instrument, press the ENTER key.
Thecongurationring(seeFigure4-4)canbenavigatedaroundusingthe
▲or▼key.
Figure 4-3
• Set Clock: AllowsthesettingofTimeandDate.
• Setup Nameplate: AllowsselectionandeditingofPresent
Nameplatevoltagesorratios.Predenedratioscanonlybeedited
throughDataView
®
.
• Select Test Type: AllowstheselectionofTestType(VT/PTorCT).
• Select Test Mode: AllowsselectionoftheTestMode(Ratioor
Continuity/RatioinVT/PTMode).
• Select Storage Mode: Allowstheselectionofdatastoragemode
(AutomaticorManual).
www.ShopAEMC.com
Shop for AEMC products online at:
1.877.766.5412