AEMC DTR 8510 - Test Management and Data Handling

Digital Transformer Ratiometer DTR
®
Model 8510 47
7.4 Configuring the DTR
®
8510
ToConguretheDTR
®
8510, perform the following steps:
1. OpentheControl Panelandconnecttotheinstrument.Toopenthe
ControlPanelreferto§7.2
2. Next, select Congure from the Instrument menu or click on the
Congureicon .TheCongureInstrumentdialogboxwillbedis-
played.
Figure 7-8
Date Format: AllowsselectionoftheDateFormatasMM/DD/YYor
DD/MM/YYorYY/MM/DD.
Time format: AllowsselectionofTimeformatas24-houror12-hourformat.
Default Test Type: AllowsselectionofVT/PTorCTtest.
Default Test Mode: AllowsselectionoftestforRatioonlyorCont/Ratio
(ContinuityandRatio)mode.
www.ShopAEMC.com
Shop for AEMC products online at:
1.877.766.5412