AEMC DTR 8510 - 7 Dataview Software; Installing Dataview

Digital Transformer Ratiometer DTR
®
Model 8510 39
CHAPTER 7
DATAVIEW
®
SOFTWARE
7.1 Installing DataView
®
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING
THE SOFTWARE AND DRIVERS.
NOTE:Wheninstalling,theusermusthaveAdministrativeaccess
rightsduringtheinstallation.Theusersaccessrightscanbechanged
aftertheinstallationiscomplete.
DataView
®
mustbereinstalledforeachuserinamulti-usersystem.
USB Flash Drive Install
1. InserttheUSBstickintoanavailableUSBport(waitfordrivertobe
installed).
2. If Autorun is enabled then an AutoPlay window should appear as
shown.
NOTE: If Autorun is disabled, it will be necessary to open Windows
Explorer, then locate and open the USB stick drive labeled “DataView”
to view the files on the drive.
www.ShopAEMC.com
Shop for AEMC products online at:
1.877.766.5412