AEMC DTR 8510 User Manual

Digital Transformer Ratiometer DTR
®
Model 8510 25
4.3.9 Restoring Factory Defaults
Thefactorydefaultsettingsareshowninthefollowingtable:
Parameter Default Value
Test Mode Ratio
Test Type VT/PT
Filter Normal
Storage Mode Manual
Language English
Nameplate Disable
Nameplate
Values
19920:7200
19920:4800
19920:2400
19920:2160
19920:120
7200:2400
7200:2160
7200:120
2400:120
2160:120
Table 4-1
Tosettheinstrumentbacktothefactorydefaultconguration:
1. TurntheDTR
®
8510 OFF.
2. Pressandholdthe▲key.
3. TurntheDTR
®
8510 ON.
4. Releasethe▲keywhentheinstrumentbeeps.
NOTE: The previously stored Measurement Records will remain in the
memory and the language will remain the same as before the default
configuration was loaded.
www.ShopAEMC.com
Shop for AEMC products online at:
1.877.766.5412

AEMC DTR 8510 Specifications

General

Brand	AEMC
Model	DTR 8510
Category	Measuring Instruments
Language	English