AEMC DTR 8510 - Page 54

52 Digital Transformer Ratiometer DTR
®
Model 8510
Oncetheleisopen,selectCreate DataView Report fromthe Filemenu
orclickontheCreate DataView Reporticon.Areportwillappearonthe
screen.
Figure 7-15
NOTE:
• Alldownloadedlesandreportsaresavedinthedefaultlocation
of"MyDocuments"or"Documents"foreachuser.
• DataView
®
andControlPanel(CP)arefullyintegratedprograms
forinstrumentcontrolanddataanalysis/reportgeneration.CP
candownloadtheMeasurementRecordspreviouslystoredin
theDTR
®
8510memory.TheseMeasurementRecordscan
bestoredinthe*.icpformat.Reportscanbegeneratedbya
singleclickonthe“icon”orcreate DataView Report fromthe
Filemenu.Whenareportiscreated,adatabasele*.dvbis
automaticallycreated.
• DataView
®
canalsocalltheCPortheCPofotherinstruments.
• DataView
®
cannotopen*.icples.
• WhenareportiscreatedfromtheCP,areportcanbestored.In
theprocessa*.dvwleisgenerated.
• DataView
®
canalsocreateareportfromtheavailabledatabase
les.A*.dvbleisautomaticallycreatedwhentheCPcreatesa
reportfrom*.icple.
• Whenareportiscreated,a*.dvwleiscreated.Thisreportcan
bedirectlyopenedfromDataView
®
.
NOTE: For more information about using DataView
®
, refer to the
DataView
®
manual that is included on the installation CD. This manual
can also be found online at www.aemc.com on our software download
page for DataView
®
.
www.ShopAEMC.com
Shop for AEMC products online at:
1.877.766.5412