AERMEC Multichiller-Evo - Installer - Remote Control: Enable On;Off from Digital Input; Remote Control: Unit of Measure

31
INSTALLER - Remote control - Enable On/O from digital input
A
B
C

Index Meaning
1 Set whether to enable the system’s On/O from the ID2 digital input
2 Set whether to enable the system’s On/O from the ID3 digital input
3 Enable On/o from BMS
ACTIONS
AVAILABLE:
1
A B D
2


D
E
F


C
E

F
G
3
G

INSTALLER - Remote control - Enable On/O from digital input
A
B
C

Index Meaning
1 Sets and conrms the units of measurement to use to manage the units
2 Displays the actual set point with the relative unit of measurement applied
ACTIONS
AVAILABLE:
1
A B D
2


D
E
F
      

       

C
E

F
REMEMBER THAT:
To change the units of measurement, follow the instrucons provided on the
display!
