AERMEC Multichiller-Evo User Manual

4
QUICK REFERENCE
This manual shows all the user menu and installer menu masks contained in the management soware of the Mulchiller-Evo accessory, however,
this page shows a summary diagram of the basic operaons which the user might need, indicang the reference to this manual page which describes
the desired funcon page (for all other informaon refer to the index):
Select the funconing mode (Page 15)
Set a main working setpoint (Page 15)
Set the BMS parameters (Page 30)
Switch the unit on or o (Page 15)
Set the me periods (Page 16)
Change system language (Page 21)
REMEMBER THAT:
The Mulchiller-Evo accessory is factory set with the data and parameters of the chillers used for the system it is, therefore, necessary,
when ordering, to specify the number and type of chiller that the accessory will have to manage.
ATTENTION: aer compleng the installaon of the Mulchiller-Evo accessory, any changes, addions or removal of inially provided
chillers, must be noed to the company for possible adjustment of the applicaon.


AERMEC Multichiller-Evo Specifications

General

Brand	AERMEC
Model	Multichiller-Evo
Category	Controller
Language	English